by Fakolith Chemical Systems
Paint for the protection and repair of facades, which respects to the maximum the texture of the base. Suitable for the renovation and homogeneous finish of single-layer mortars and facades in general. High resistance to weathering and microorganisms, easy application and excellent finish.
PROPERTIES: DISPERLITH REPARA is a special paint, mainly for use in the repair and protection of single-coat mortars, and similar, that suffer from defects and tonal variations. Respects the texture of the base, which does not appear to be painted. Water-based dispersion formulated with 100% pure acrylates, with low emissions and low smell (low Voc), free of APEO, ammonia, formaldehyde and heavy metals, highly resistant to damp in interiors and exteriors. DISPERLITH REPARA forms a very well balanced film of paint, easy to apply, fast drying, low smell and with an excellent finish, in line with DIN EN 13300 it has Class 1 scrub resistance and provides Class 2 cover (250 ml/m²), Class 1 water vapour breathability (SD = 0.14), and Class 3 water permeability (W = 0.05 ). Excellent adherence to all manner of bases. Highly resistant to weather, UV rays, base alkalinity and carbonation. Can be applied at temperatures of 5ºC and over and at maximum relative humidity of 75%. Available in white and the colours of the NCS Exteriors chart.
MAIN USE: DISPERLITH REPARA is mainly used on exterior walls, façades with single-coat mortar or similar suffering from defects and tonal variations, compatible with most duly primed surfaces and for use on previous layers of dispersion paints and/or primers that are well adhered and resistant to cross-cut testing, Class 0-1 UNE-DIN EN ISO 2409:2007. Particularly for general industrial uses, construction, façade renovation and civil engineering.
HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Application at ambient and base temperatures of 5ºC or above. Following adequate preparation of the base, DISPERLITH REPARA is applied without diluting, in 2 coats, using brushes, rollers or airless spray guns. The base must be clean and free of hygroscopic salts, microorganisms, etc., and duly primed, depending on the case. The second coat can be applied when the first coat starts to lose its wet sheen and becomes dry to the touch (in normal conditions, at 20ºC-60% humidity, after around 2-3 hours). Clean utensils immediately after use with water. For more information consult the specifications sheet and/or application guidelines, along with the safety sheet.
AVERAGE YIELD: DISPERLITH REPARA provides a yield of approx. 5-8 litre/m², although this may vary considerably, depending on how it is applied and the texture and absorption of the base.
Cans of 12.5 l.
