by Fakolith Chemical Systems
Stain isolating spray for small surfaces, white, and fast drying. To isolate difficult stains of humidity, felt-tip pens, markers, graffiti, rust, nicotine, etc. and then to be able to paint over it, without the stain transferring to the subsequent paint. For interiors and exteriors.
PROPERTIES: FAKOLITH FK-33 is a white, fast drying, covering spray for blocking difficult stains and then painting over them, without the stain showing through the subsequent coat of paint. For both interiors and exteriors.
RECOMMENDED USE: FK-33 is used prior to painting, in order to cover and block all types of stains, such as nicotine, smoke, damp patches, felt tip markers, graffiti, etc.
HOW TO APPLY: Carefully protect all surfaces that are not to be treated from splashing. Depending on the work required in each case, either one or two coats of FAKOLITH FK-33 will need to be applied. It will have to be possible to appreciate a film of the product. The surface will have to be dry. FK-33 covering spray is applied in a coat that is not too thick, well-worked, up and down and left to right, sprayed from a distance of around 20-25cm. It is recommended that two coats be applied, at intervals of 10 minutes. Once 20 minutes have elapsed you can apply the paint. For more information consult the specifications sheet and/or application guidelines and the safety sheet.
AVERAGE YIELD: FK-33 offers an average yield of approx. 10-14 m²/l, with average consumption of between 80 ml/m². Although this may vary greatly, depending on how it is applied and the texture and absorption of the surface.
Spray of 400 ml.
